---
title: Install and use the print app
sidebar:
  order: 3.2
---

Toreca Cloud Print sends stock labels from your browser to a printer on **the same computer**. Connect the app and test your printer once, then print without saving and opening a PDF each time.

See [Brother QL-820NWBc setup](/en/guides/inventory/brother-printer) for the printer itself and [Putaway and QR labels](/en/guides/inventory/putaway) for choosing stock to label.

:::note[Download]
In Toreca Cloud, open **Settings** › **Label printing** › **Print directly from this computer** to download the Mac DMG or Windows setup EXE. The Mac version is signed and Apple-notarized. The Windows version is an unsigned preview. If downloads are still being prepared, [open and print the PDF](/en/guides/inventory/putaway#4-print-at-100-and-stick-the-labels-on).
:::

## 1. Prepare your computer and printer

| Check    | What you need                                                                                                                  |
| -------- | ------------------------------------------------------------------------------------------------------------------------------ |
| Computer | Apple Silicon Mac or Windows x64                                                                                               |
| Printer  | Install its driver on the same computer and confirm ordinary test printing works                                               |
| Paper    | For DK-2210, load 29 mm continuous tape                                                                                        |
| Browser  | Sign into Toreca Cloud on the computer running the app. This does not provide remote printing to another computer or an iPhone |

### Using another Windows PC

Install the print app and the Brother QL-820NWB/NWBc driver on each PC, then register the printer in Windows. USB, Bluetooth and Wi-Fi may appear as separate printers. Select the network printer for Wi-Fi, using the Brother driver rather than Microsoft IPP Class Driver.

The PC must be able to reach the printer's network. Different SSIDs or 2.4/5 GHz bands can work, but guest isolation or network separation may block communication. Compare the printer's current IP address with its Windows port configuration.

Print app 0.1.3 and later checks the driver, pending jobs, paper settings and standard TCP/IP port connectivity before roll printing. When paper settings differ, a test print offers **Apply and test** on the PC to set 29 mm continuous tape, the requested feed length and portrait orientation. This changes that printer's defaults for other applications too, and saves a backup. Ordinary inventory printing does not change these settings.

These checks require print app 0.1.3 or later. Pair and test each PC, browser and account.

## 2. Install and start the app

### Mac

If you receive the DMG distribution:

1. Check its source and target platform, then open the DMG.
2. Drag **Toreca Cloud Print.app** to **Applications**.
3. Launch the copy in Applications. Do not keep running it from the mounted DMG.
4. Check the menu bar for the app. It can be running without a normal application window.

For a ZIP package, extract it and move the app into Applications before launching.

### Windows

If you receive the installer:

1. Check its source and target platform, then run the setup exe.
2. Follow the installer instructions.
3. Start **トレカクラウド印刷** (Toreca Cloud Print) from the Start menu.
4. Check the system tray, including hidden icons, for the running app.

Keep an extracted ZIP package's whole folder together. Do not move the application exe out on its own.

:::warning
If the OS cannot verify the publisher, signature or notarization, check with the distributor. These instructions do not require disabling OS protections.
:::

## 3. Connect the browser to the app

<img
  src="/screenshots/en/inventory/refresh-print-connect.webp"
  alt="Downloading and connecting the print app"
/>

Download this computer's app at ①, start it, then connect with ②.

1. In Toreca Cloud, open **Settings** › **Label printing**.
2. Under **Print directly from this computer**, click **Connect print app**.
3. If your browser requests local network access, confirm it relates to this action and allow it.
4. In the computer app's connection prompt, check `https://toreca-cloud.com`, the account and shop, then choose **接続を許可** (Allow connection).
5. Confirm the Web page reports a connection and offers paper and printer selection.

Cancel unexpected prompts when you have not clicked Connect print app. Connect again for a different computer, browser, account or shop.

Use **Check connection** to check communication with the print app. If it fails, start the app and check again. You must also register the paper and printer and check the printed output.

## 4. Register paper and printer

1. Choose **Paper** and **Printer**.
2. Click **Save these settings and print one test page**.
3. Check physical dimensions and clipped text. Measure the DK-2210 test sheet's 40 mm scale.
4. Click **Confirm the paper and enable direct printing** only when the output is correct. **Registered: printer name** confirms registration.

If the test PDF has no QR code, print a small stock-label PDF and check QR scanning as well. After registration, check cuts and QR codes on two consecutive labels in your first direct print.

The registration button becomes available after a successful test submission on this page. Do not confirm an untested printer. Testing again clears the previous confirmation, so check the paper and register again. Choose and test again after changing the printer or paper.

### DK-2210

In settings, choose **DK-2210: 29mm wide × 50mm feed (recommended)**. In the stock label dialog, choose **Brother DK-2210 (29 × 50 mm)**. The app sends the portrait 29 × 50 mm PDF without rotation or scaling. Check the OS driver for 29 mm continuous tape, 50 mm feed length, portrait and 100% scale. Cut each label for separate pieces, or turn auto cut off and cut at end on for a connected strip; see [Brother setup](/en/guides/inventory/brother-printer).

The older **Legacy: 29mm wide × 56mm feed (50×25mm content)** format is separate. Do not confuse it with native DK-2210 29 × 50 mm output. Register the appropriate paper and printer separately for A4 65-label and 24-label sheets.

## 5. Print stock labels

1. Keep the app running and open **Print labels** from inventory or a receipt slip.
2. Choose the paper. When its registered printer is available, the action button shows **Print**. Otherwise, the dialog shows the reason and offers PDF printing. Register printers and adjust alignment in the label printing settings.
3. Check the count and preview, then print.
4. When submission is reported, also check the physical paper output.

**Submission is not confirmation that paper has finished printing.** Check the printer and OS queue for paper shortages, open covers or disconnections.

### Choose an output mode

If the version offered in Settings is earlier than 0.1.5, wait for the newer release or use a supported mode or PDF printing.

Print app 0.1.5 or later offers the same three modes on Mac and Windows. Use a network-connected QL-820NWB/NWBc with DK-2210. On Windows, register a Standard TCP/IP RAW 9100 queue. The PC must reach the printer over TCP 9100 and SNMP. The shared network path does not support USB, Bluetooth or WSD queues. Existing automatic-cut and connected-strip printing over USB on Mac remains available. Printer-button coordination requires a network connection on both operating systems.

- **Cut each label automatically** cuts every label.
- **Print a connected strip** cuts only at the end, up to 200 labels in one PDF.
- **Cut with the printer button** sends one label, then waits until cutting is armed. Briefly press the printer button to cut and send the next label. The last cut finishes the batch. Keep the PC, browser and print app running.

Older apps show only their supported modes. Use PDF printing below to continue on computers or connections outside the desktop app's support scope.

For an existing batch, **Print this PDF directly** prints the same label numbers. Labels are issued when the PDF is created; a printing failure does not require issuing new numbers.

When direct printing is unavailable, use **Create PDF**. Split large batches or print the PDFs of an issued batch if direct printing reaches its limits.

If direct printing fails after labels have been issued, the PDF and batch remain available. **Print this PDF directly** is no longer shown in that completion dialog after a failure. Open the printer settings, check the paper and queue for output already sent, then reprint the missing output from the PDF or the existing batch under **Putaway → Print batches**. Keep the same label numbers.

## 6. An unknown result or interrupted batch

If the result is unknown, **do not immediately start a new print**. The job may already be in the OS queue.

1. Check the paper and OS print queue.
2. Use **接続と送信状況** (Connections and send status) in the app menu if needed.
3. For multiple PDF parts, identify which parts were sent. Do not duplicate those parts.
4. Intentionally reprint only the missing output, with the same label numbers.

Restarting the app does not automatically resend jobs with unknown results.

## 7. Startup, updates and disconnection

- **Start automatically:** enable **ログイン時に起動** (Launch at login) in the app menu.
- **Open settings:** choose **プリンター設定を開く** (Open printer settings) in the app menu.
- **Update:** choose **終了** (Quit) first, then replace the app using the new distribution. This version has no automatic updater. Check the connection and test print after updating.
- **Disconnect this connection:** click **Disconnect** on the Web settings page.
- **Finish using a shared computer:** choose **すべての接続を解除** (Revoke all connections) in the app menu. Connect again before reuse.

Disconnecting does not cancel jobs already submitted to the OS. Check the OS queue if printing needs to stop.

## Troubleshooting

| Problem                     | Check                                                                                                                            |
| --------------------------- | -------------------------------------------------------------------------------------------------------------------------------- |
| Cannot connect              | Start the app on the same computer, check browser local network access and the current account/shop, then click Check connection |
| Printer missing             | Check the OS printer list, driver and USB/Wi-Fi connection, then reopen settings. The app does not silently use another printer  |
| Direct printing unavailable | Complete a test print and registration for the selected paper                                                                    |
| Wrong paper or clipping     | Check DK-2210 versus the older roll format, driver length/scale/cutting and alignment offsets                                    |
| Another job is processing   | Wait; do not repeatedly click. For an unknown result, check paper and the OS queue first                                         |
| Large batch rejected        | Split the batch or open its PDFs to print manually                                                                               |
| Port error at startup       | Ask your contact to check duplicate app instances or conflicts with another local app                                            |

For loading the roll and preparing the printer, see [Brother setup](/en/guides/inventory/brother-printer).
